Skip to Content

1000
JBL MS8 - OEM DSP System Integrator

JBL-MS8

JBL MS8 - OEM DSP System Integrator

£599.99

Aftermarket sound with a factory head unit.
Superior Performance from Any System – Improves every measure of audio performance (frequency response, bass performance, dynamics, clarity, detail and stereo imaging) from any combination of OEM and aftermarket components.
Easy, Step-by-Step Setup – Simple menu-driven calibration based on detailed input from binaural headset microphone.
Optimizes Up To Eight Input Channels – Produces a flat-response, full-bandwidth signal from up to eight input channels.
DSP Equalization – Improves tonal accuracy by automatically compensating for the sonic characteristics of the speakers, electronics and vehicle interior.
DSP Time Correction – Automatically ensures that the sound from all speakers arrives at the listener’s ears simultaneously, in up to four individual seating positions, dramatically improving clarity and imaging.
Sophisticated Crossover Functions – Precise, userselectable crossover points and crossover slopes for up to eight separate outputs.
Logic 7® Surround Processing – Creates a realistic 5.1- or 7.1-channel surround experience from 2-channel source material.

The MS-8 is a new kind of car audio component, an automatic equalizer that can optimize any vehicle’s performance in about ten minutes flat. Just follow the step-by-step setup procedure and the MS-8 maximizes frequency response, bass performance, dynamics, clarity, detail and stereo imaging – every important parameter of sonic greatness – from virtually any combination of factory-installed and/or aftermarket components. And after it works its magic? You’ll be left with a 31-band graphic equalizer and a full set of preamp controls to fine-tune day-to-day operations.

  • SPECIFICATIONS:
  • Output 4 Ohms 18W x 8 channels @4 ohms•Output 2 Ohms 30W x 8 channels @2 ohms
  • Frequency Response 20Hz – 20kHz
  • Signal-to-Noise Ratio (Line-in/Line out): >90dB (Line-in/Speaker out): >85dB
  • Maximum input signal 15 Volts (Speaker Level Input) 2.8 Volts (Line Input)
  • Dimensions Main Unit Dimensions (L x W x H): 11-1/2" x 7-3/8" x 2-1/8" Display Unit Dimensions (H x W x D, including stand): 3-1/8" x 3-3/8" x 2-7/16"
  • Weight Weight: Main unit – 6.4 lb (2.9kg) Display unit – 2.8 oz (80g) Remote control – 1.4 oz (40g)